Polymer Coated Powder Free

Exceptional Performance

Coated with polymer to provide a powder free surface finish without the use of traditional chlorination, DERMAGRIP® Polymer Coated Latex Examination Gloves are manufactured to the highest standards.These gloves offer superior comfort, fit, dexterity and tactile sensitivity while maintaining an excellent barrier of protection against harmful substances.

The polymer coating offers enhanced features, which include:

• No unpleasant odor

• Excellent grip in wet and dry applications

• Consistent even colour

• Superior aging characteristics compared to chlorinated gloves

• Easy and fast donning Read More

Polymer Coated Powder Free Special

Type Powder free, polymer coated and non-sterile
Primary Materials Natural rubber latex
Surface Treatment Polymer coated on both surfaces
Protein Content This latex glove contains 50 micrograms or less of total water extractable protein per gram of glove
Color White to off white
Design and Feature Ambidextrous, fully textured surface and beaded cuff
Packing 100 gloves per dispenser, 10 dispensers per carton
Product Conformance
  • Medical Device: in compliance with European Medical Device Directive 93/42/EEC (CE Class I)
  • EN 455-1(2000), EN 455-2(2009 + A1: 2015), EN 455-3(2015), and EN 455-4(2009)
  • ASTM D3578
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-2:2003, EN 374-3:2003 & EN 388:2003, CE 0086
Quality Assurance Manufacturing process is in compliance with US FDA Quality System Regulation (QSR) and BS EN IS09001 Quality System

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Single use only
    Single use only

Pre-shipment Quality Inspection

Criteria Inspection Sampling Plan
Dimension N=13, AQL Median
Physical Properties N=13, AQL Median
1000ml Water Leak Test G-I, AQL 1.5
Visual Inspection for Major Defects G-I, AQL 2.5
Visual Inspection for Minor Defects G-I, AQL 4.0
Powder Free Residue N=5
Protein Contant N=8
Tear Resistance N=4
Dexterity N=4 pairs

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa) 30 26
Force At Break (N) 13 12


Glove Size Reorder# Palm Width (mm) Length (mm)
Extra-small D1400-45 ≤ 80 240 min
Small D1401-45 80 ± 10 240 min
Medium D1402-45 95 ± 10 240 min
Large D1403-45 110 ± 10 240 min
Extra-large D1404-45 ≥ 110 240 min


Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip) 0.15 min
Palm (at center of palm) 0.13 min
Cuff (at 25mm from cuff end) 0.10 min