Ultra Latex Powder Free

Exceptional Performance

Medical gloves serve to provide protection from unwanted and dangerous substances for both healthcare professionals and patients. DERMAGRIP® Ultra Latex Examination Gloves are designed to meet and exceed international product standards using sophisticated technologies and innovations to provide uncompromized protection to its users.

Dermagrip® Ultra Latex Examination Gloves stand out for its unique surface feature allowing for extra sensitivity.

Ultra Latex Powder Free Special

Type Powder free and non-sterile
Primary Materials Natural rubber latex
Powder No powder lubricant added. Online surface treated
Protein Content: This latex glove contains 50 micrograms or less of total water extractable protein per gram of glove
Color Natural (i.e. off white to yellow)
Design and Feature Ambidextrous, finger textured and beaded cuff
Packing 100 gloves per dispenser, 10 dispenser per carton
Product Conformance
  • Medical Device: in compliance with European Medical Device Directive 93/42/EEC (CE Class I)
  • EN 455-1(2000), EN 455-2(2009 + A1: 2015), EN 455-3(2015), and EN 455-4(2009)
  • ASTM D3578
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-2:2003, EN 374-3:2003 & EN 388:2003, CE 0086
Quality Assurance
  • US FDA Quality System Regulations (QSR)
  • ISO90001 Quality Mangement System
  • BS EN ISO13485 Quality Management Systems

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Single use only
    Single use only

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa)
Force At Break (N)
min. 9
min. 6


Glove Size Reorder# Palm Width (mm) Length (mm)
Extra-Small D1000-20 ≤ 80 min. 240
Small D1001-20 80 ± 10 min. 240
Medium D1002-20 95 ± 10 min. 240
Large D1003-20 111 ± 10 min. 240
Extra-Large D1004-20 110 ≥ min. 240


Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip) 0.16 ± 0.02
Palm (at center of palm) 0.13 ± 0.02
Cuff (at 25mm from cuff end)  0.10 ± 0.01

Pre-shipment Quality Inspection

Criteria Inspection Sampling Plan
Dimension N=13, AQL Median
Physical Properties N=13, AQL Median
1000ml Water Leak Test G-I, AQL 1.5
Visual Inspection for Major Defects G-I, AQL 2.5
Visual Inspection for Minor Defects G-I, AQL 4.0
Powder Free Residue N=5, AQL N/A
Protein Contain N=8, AQL N/A