DERMAGRIP®

Nitrile Ultra Plus Powder Free

D14xx-28
No Need to Compromise Comfort for Protection

DERMAGRIP® Ultra Plus Nitrile Examination Gloves exhibit higher abrasion and puncture resistance than gloves made from Natural Rubber. These characteristics, combined with Nitrile’s excellent chemical resistance to a wide range of chemicals, including hydrocarbons, make DERMAGRIP® Ultra Plus Nitrile  Examination Gloves the obvious choice for protection.

This glove comes with an extended cuff design, in accordance to the glove standards set by the Personal Protective Equipment Directives (PPE) to provide added protection in high risk and critical situations that require maximum coverage in the handling of various biological and chemical agents as well as exposure to potential physical hazards.

Superior strength with better puncture resistant properties than Natural Rubber. Longer cuff for added protection.

Nitrile Ultra Plus Powder Free Special

Type Powder free , extended cuff and non-sterile examination gloves
Primary Materials 100% nitrile (Acrylonitrile-butadiene)
Powder No powder lubricant added.
Color Blue (PMS 285)
Design and Feature Ambidextrous, finger textured and beaded cuff
Packing 200 gloves per dispenser, 10 dispensers per carton (XS-L) 180 gloves per dispenser, 10 dispensers per carton (XL)
Product Conformance
  • Medical Device: in compliance with European Medical Device Directive 93/42/EEC (CE Class I)
  • EN 455-1:2000, EN 455-2:(2009 + A1:2015), EN 455-3 (2015) and EN 455-4 (2009)
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-12003, EN 374-3:2003 .N 388:2003, CE 0086
  • ASTM D6319
Quality Assurance
  • US FDA Quality System Regulation (QSR)
  • ISO90001 Quality Mangement System
  • BS EN ISO13485 Quality Systems

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Latex free
    Latex free
  • Single use only
    Single use only

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa) min. 14 min. 14
Force At Break (N) min. 6 min. 6

Pre-shipment Quality Inspection:

Criteria Sampling Plan
Dimension N=13, AQL Median
Physical Properties N=13, AQL Median
1000ml Water Leak Test G-1, AQL 1.5
Powder Free Residue N=5
Visual Inspection for Major Defects G1, AQL 2.5
Visual Inspection for Minor Defects G1, AQL 4.0

Dimensions

Glove Size Reorder# Palm Width (mm) Length (mm)
Extra-Small D1400-28 ≤ 80 min. 290
Small D1401-28 80 ± 10 min. 290
Medium D1402-28 95 ± 10 min. 290
Large D1403-28 110 ± 10 min. 290
Extra-large D1404-28 ≥ 110 min. 290

Thickness

Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip) 0.11 ± 0.02
Palm (at center of palm) 0.08 ± 0.02
Cuff (at 25mm from cuff end) 0.07 ± 0.02