No Need to Compromise Comfort for Protection

Medical gloves provide protection from unwanted and dangerous substances for both healthcare professionals and patients. DERMAGRIP® Nitrile Ultra LS Examination Gloves meet and exceed international product standards to provide uncompromising protection to its users.

SafeDon System

Hospital-acquired infections (HAI’s) are a growing concern in today’s healthcare environment¹. The most common route of contamination is through hands.² ³ Despite the introduction of hand washing initiatives the level of compliance cannot be guaranteed to reach 100%.³ International studies have shown that gloves and traditional glove boxes themselves can be a vehicle for contamination. The new innovative SafeDon™ dispensing system is a hygienic initiative which further helps to reduce the risk of cross contamination. Dermagrip® Nitrile Ultra LS Examination Gloves are formulated with 100% nitrile (Acrylonitrile- butadiene) providing an alternative solution for individuals who are allergic to natural rubber

SAFEDON NITRILE Ultra LS Powder Free Special

Type Powder free and non-sterile
Primary Materials Acrylonitrile-butadiene
Powder No powder lubricant added
Color Blue (PMS 285)
Design and Feature Ambidextrous, finger textured and beaded cuff
Packing 250 gloves per dispenser, 8 dispensers per carton for size XS to Large and 240 gloves per dispenser, 8 dispensers per carton for size XL
Product Conformance
  • Medical Device: in compliance with European Medical Device Directive 93/42/EEC (CE Class I)
  • EN 455-1:2000, EN 455-2:(2009 + A1:2015), EN 455-3 (2015) and EN 455-4 (2009)
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-12003, EN 374-3:2003 .N 388:2003, CE 0086
  • ASTM D6319
Quality Assurance
  • US FDA Quality System Regulations (QSR)
  • ISO90001 Quality Mangement System
  • BS EN ISO13485 Quality Systems

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Latex free
    Latex free
  • Single use only
    Single use only

Pre-shipment Quality Inspection:

Criteria Sampling Plan
Dimension N=13, AQL Median
Physical Properties N=13, AQL Median
1000ml Water Leak Test G-1, AQL 1.5
Powder Free Residue N=5
Visual Inspection for Major Defects G1, AQL 2.5
Visual Inspection for Minor Defects G1, AQL 4.0


Glove Size Reorder# Palm Width (mm) Length (mm)
Extra-small D1500-84 ≤ 80 min. 240
Small D1501-84 80 ± 10 min. 240
Medium D1502-84 95 ± 10 min. 240
Large D1503-84 110 ± 10 min. 240
Extra-Large D1504-84 ≥ 110 min. 240


Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip) min. 0.05
Palm (at center of palm) min. 0.05
Cuff (at 25mm from cuff end) min. 0.05

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa) min.14 min. 14
Force At Break (N) min. 6 min. 6