DERMAGRIP®

Ultra LT Nitrile Powder Free

D11xx-23
No Need to Compromise Comfort for Protection

Medical gloves provide protection from unwanted and dangerous substances for both healthcare professionals and patients. DERMAGRIP® Nitrile Ultra LT Examination Gloves meet and exceed international product standards to provide uncompromising protection to its users.

Dermagrip® Nitrile Ultra LT Examination Gloves are formulated with 100% nitrile (Acrylonitrile-butadiene) providing an alternative solution for individuals who are allergic to natural rubber latex.

An optimized formulation and thickness make this gloves our softest and most comfortable nitrile gloves yet. 100% nitrile material eliminates Type 1 allergic reactions associated with natural rubber latex protein. Resists permeation by a wider range of chemical than natural rubber latex of the same thickness.

Ultra LT Nitrile Powder Free Special

Type Powder free and non-sterile
Primary Materials Acrylonitrile-butadiene
Surface Treatment Chlorination on donning side
Powder No powder lubricant added. Lightly chlorinated
Color Blue (PMS 292)
Design and Feature Ambidextrous, finger textured and beaded cuff
Packing 100 gloves per dispenser, 10 dispensers per carton
Product Conformance
  • Medical Device: in compliance with European Medical Device Directive 93/42/EEC (CE Class I)
  • EN 455-1:2000, EN 455-2:(2009 + A1:2015), EN 455-3 (2015) and EN 455-4 (2009)
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-12003, EN 374-3:2003 .N 388:2003, CE 0086
  • ASTM D6319
Quality Assurance
  • US FDA Quality System Regulation (QSR)
  • ISO90001 Quality Mangement System
  • BS EN ISO13485 Quality Systems

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Latex free
    Latex free
  • Single use only
    Single use only

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa)2621
Force At Break (N)66

Pre-shipment Quality Inspection:

Criteria Sampling Plan
Dimension N=13, AQL Median
Physical Properties N=13, AQL Median
1000ml Water Leak Test G-1, AQL 1.5
Powder Free Residue N=5
Visual Inspection for Major Defects G1, AQL 2.5
Visual Inspection for Minor Defects G1, AQL 4.0

Dimensions

Glove Size Reorder# Palm Width (mm) Length (mm)
Extra-Small D1100-23 ≤ 80 min. 240
Small D1101-23 80 ± 10 min. 240
Medium D1102-23 95 ± 10 min. 240
Large D1103-23 110 ± 10 min. 240
Extra-large D1104-23 ≥ 110 min. 240

Thickness

Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip)min. 0.07
Palm (at center of palm)min. 0.06
Cuff (at 25mm from cuff end)min. 0.05