DERMAGRIP®

Ultra Nitrile Powder Free, Sterile

D15xx-82
Added Protection

While infection control is the primary concern in the medical industry, latex sensitive and chemical resistance are often important factors in glove selection. DERMAGRIP® Nitrile Ultra Sterile Examination Gloves address all of these concerns and are sterilized through gamma irradiation process for compatible use under stringently controlled surroundings.

Among the suitable applications of the gloves are:

  • In sterile room procedures and while handling hygienic instruments
  • During surgical procedures by scrub, circulating and anaesthetic nurses
  • While conducting non-invasive and minor office surgeries
  • Read More

     

Ultra Nitrile Powder Free, Sterile Special

Type Powder-free and non-sterile
Primary Materials Acrylonitrile-butadiene
Powder No powder lubricant added
Color Blue (PMS 285 U)
Design and Feature Ambidextrous, textured surface at fingers and beaded cuff
Packing 2 gloves per pouch, 50 pouches per dispenser, 6 dispensers per carton
Product Conformance
  • Medical Device: in compliance with European Medical Device Directive 93/42/EEC (CE Class I)
  • EN 455-1:2000, EN 455-2:(2009 + A1:2015), EN 455-3 (2015) and EN 455-4 (2009)
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-12003, EN 374-3:2003 .N 388:2003, CE 0086
  • ASTM D6319
Quality Assurance
  • US FDA Quality System Regulation (QSR)
  • IS09001 Quality Management System
  • IS013485 Quality Management System

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Latex free
    Latex free
  • Single use only
    Single use only

Pre-shipment Quality Inspection

Criteria Inspection Sampling Plan
Dimension N=13, AQL Median
Physical Properties N=13, AQL Median
1000ml Water Leak Test G-I, AQL 1.5
Visual Inspection for Major Defects G-I, AQL 2.5
Visual Inspection for Minor Defects G-I, AQL 4.0
Powder Free Residue N=5, AQL N/A

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa) 14 min. 14 min.
Force At Break (N) 6 min. 6 min.

Dimensions

Glove Size Reorder# Palm Width (mm) Length (mm)
Extra-Small D1500-82 ≤ 80 240 min.
Small D1501-82 80 ± 10 240 min.
Medium D1502-82 95 ± 10 240 min.
Large D1503-82 110 ± 10 240 min.
Extra-large D1504-82 ≥ 110 240 min.

Thickness

Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip)0.09 min.
Palm (at center of palm)0.06 min.
Cuff (at 25mm from cuff end)0.05 min.