DERMAGRIP®

Powder Free Latex High Risk Examination Gloves

D14xx-14
Added Protection

Medical gloves provide protection from unwanted and dangerous substances for both professionals and their patients. DERMAGRIP® High Risk Examination Gloves are designed to meet and exceed international product standards using sophisticated technologies and innovations to deliver uncompromized protection to its users.

DERMAGRIP® High Risk Examination Gloves provide unparalleled and added protection in high risk situations. Thicker and stronger than normal examination gloves, these gloves are the ideal choice in situations such as trauma, medical waste handling and decontamination.They are especially suitable for use by emergency response professional such as ambulance attendants, firemen and policemen. Read More

Powder Free Latex High Risk Examination Gloves Special

Type Powder free, extra-thick extra-long and non-sterile
Primary Materials Natural rubber latex
Powder No powder lubricant added. Light chlorinated on glove surface
Protein Content This latex glove contains 50 micrograms or less of total water extractable protein per gram of glove
Color Blue (PMS 307)
Design and Feature Ambidextrous, straight fingers, textured surface all over fingers area (E4) and beaded cuff
Packing 50 gloves per dispenser, 10 dispensers per carton
Product Conformance
  • Medical Device: in compliance with European Medical Device Directive 93/42/EEC (CE Class I)
  • EN 455-1(2000), EN 455-2(2009 + A1: 2015), EN 455-3(2015), and EN 455-4(2009)
  • ASTM D3578
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-2:2003, EN 374-3:2003 & EN 388:2003, CE 0086
Quality Assurance
  • US FDA Quality System Regulations (QSR)
  • ISO90001 Quality Mangement System
  • BS EN ISO13485 Quality Management Systems

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Single use only
    Single use only

Pre-shipment Quality Inspection

Criteria Inspection Sampling Plan
Dimension N=13
Physical Properties N=13
1000ml Water Leak Test G-I, AQL 1.5
Protein Content N=8
Powder Free Residue N=5
Visual Inspection for Major Defects G-I, AQL 2.5
Visual Inspection for Minor Defects G-I, AQL 4.0

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa) 29.0 26.0
Elongation (%) 900 860
Force At Break (N) 25 21

Dimensions

Glove Size Reorder# Palm Width (mm) Length (mm)
SmallD1401-14 85 ± 4 290 ± 5
MediumD1402-14 95 ± 4290 ± 5
LargeD1403-14 105 ± 4290 ± 5
Extra-largeD1404-14115 ± 4290 ± 5

Thickness

Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip) 0.36 ± 0.04
Palm (at center of palm) 0.28 ± 0.03
Cuff (at 25mm from cuff end) 0.20 ± 0.03