DHD Platinum Powder Free Surgical Gloves, Sterile

Introducing only the best......

Natural Rubber Latex’s intrinsic softness provides an exceptional comfortable and flexible glove. The glove has been specially formulated to enable effortless double gloving. Damp Hand Donning (DHD™) - Inner surface of the glove is coated with a proprietary polymer to enhance damp hand donning.

A non-slick skin grip surface finish provides excellent instrument grip, under both wet and dry conditions. A superior tactile sensitivity provides optimum “feel”. Specially designed high tack band near the cuff of the glove to securely hold onto the wearer’s gown to minimize roll down. A reinforced beaded cuff feature ensures easy donning while preventing tearing. Tested for water leak before packing to AQL 0.65. The cuff is printed with size and logo for easy identification. Read More

DHD Platinum Powder Free, Sterile Special

Type Powder free polymer coated, curved fingers, bisque finish, beaded cuff, Damp Hand Donning (DHD™), Gamma Sterile
Primary Materials Natural rubber latex
Powder Polymer coating online and offline (DHD)
Color Off white
Protein Content This latex glove contains 50 micrograms or less of total water extractable protein per gram of glove
Design and Feature Hand Specific, curved fingers, beaded anti-rolldown reinforced cuff. Non-slick, skin grip surface finished provides good instrument grip.
Packing 1 pairs (1 left and 1 right) gloves per inner wrapper. 1 inner wrapper per pouch, 50 pairs of gloves per dispenser, 4 dispenser per carton
Product Conformance
  • Personal Protective Equipment of Complex Design Category III, in compliance with 89/686/EEC, type tested to EN 420:2003+A1:2009, EN 374-2:2003, EN 374-3:2003 & EN 388:2003, CE0086
  • Medical Device, in compliance with 93/42/EEC, type tested to EN 455-1(2000), EN 455-2(2015), EN 455-3(2015), EN 455- 4(2009) and ASTM D3577, CE0086 Class IIa Sterile
Quality Assurance
  • US FDA Quality System Regulations (QSR)
  • ISO90001 Quality Mangement System
  • BS EN ISO13485 Quality Management Systems

  • Store in cool dry place
    Store in cool dry place
  • Do not expose to water
    Do not expose to water
  • Single use only
    Single use only

Pre-shipment Quality Inspection

Criteria Inspection Sampling Plan
Dimension N=13,Median
Physical Properties N=13, Median
1000ml Water Leak Test G-1, AQL 0.65
Protein Content N=8
Powder Free Residue N=5
Visual Inspection for Major Defects G1, AQL 1.5
Visual Inspection for Minor Defects G1, AQL 4.0

Physical Properties

*Typical Physical Properties Before Aging After Aging
Tensile Strength (MPa) 28 26
Force At Break (N) 19 16


Glove Size Reorder# Palm Width (mm) Length (mm)
5.5 P3355-01 72 ± 4 278 min
6.0 P3360-01 77 ± 5 280 min
6.5 P3365-01 83 ± 5 280 min
7.0 P3370-01 89 ± 5 283 min
7.5 P3375-01 95 ± 5 287 min
8.0 P3380-01 102 ± 6 288 min
8.5 P3385-01 108 ± 6 290 min
9.0 P3390-35 114 ± 6 290 min


Location of Thickness Measurements Single Wall (mm)
Fingers (at 15mm from the extreme tip) 0.21 ± 0.02
Palm (at center of palm) 0.17 ± 0.02
Cuff (at 25mm from cuff end) 0.16 ± 0.02